Deodorant Block Holder

UPC Code: 624622110024
Shipping Size: 4″D x 4″W x 10″H
Shipping Weight: 1.5 lbs. (0.68 kg.)

Features: Frost’s 1100 surface mounted deodorizer has a low maintenance design that will suit most office and retail installations. Typically, the deodorizer is used in schools/universities, airports, restaurants, malls, office buildings, fitness facilities, and recreation centres. This product offers a simple solution to holding janitorial deodorant blocks

• Surface mounted
• Easy to install and maintain
• Holds standard deodorant blocks
• Chrome plated

Operation: Slide cover off and insert janitorial deodorant blocks into the unit. Replace cover and secure.

Capacity: Designed to hold standard deodorant blocks which can be purchased through your local janitorial supplier.

Materials:

• Body: Chrome plated 20 gauge steel

Product Dimensions: 8.9cm W x 22.9cm H x 7.6cm D (3 1/2″ W x 9” H x 3” D)

Product Weight: 0.45 kg (1 lbs)

Installation Guidelines: Mark holes in the back of the unit against the wall in the desired location with a pencil. Use a level to ensure the unit is straight. Use the screws and anchors provided to drill or screw into the wall, leaving a portion of the screw off the wall. Then simply slide the unit onto the end of the screw and slide the unit down to secure it. Then tighten the screws to lock into place.

Maintenance: Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners. For general dirt and blemishes on painted steel or plastic use warm water and mild soap, or a general mild cleaning solution. When using any type of cleaning solution, spray onto a discrete area to test before full usage. After the cleaning agent is applied, wipe off with a clean soft cloth or sponge. 

Warranty: If any product or part proves to be defective within 12 months from date of shipment from the factory it will be repaired or replaced without any charge including freight costs when authorized. Costs resulting from the installation or removal of defective products are not covered under this warranty. Discolouration to stainless steel parts resulting from exposure to harsh environmental and / or chemicals are not considered to be defects in workmanship or material and are not covered under warranty.