Pet Waste Bag Dispenser

 PET WASTE BAG DISPENSER 

UPC: 624622201043
Shipping Size: 10″L x 11″D x 4″H (25.4cm L x 27.9cm D x 10.2cm H)
Shipping Weight: 5 lbs. (2.3 kg.)

Site Location: The 2010 pet waste bag dispenser is perfect for any area with high traffic pet ownership. These dispensers are designed for outdoor use in and around public parks, condominiums, residential paths, schools/universities, and common courtyard areas.

Features: The 2010 pet waste bag dispenser is made of heavy duty 18 gauge steel and finished with grey powder coated rust proof paint. The dispenser comes with a keyed tumbler lock to reduce pilferage and vandalism. The dispenser holds two boxes of pet waste disposable bags, each box holds 200 bags. Disposable bags are sold separately under Frost code 2012. This dispenser can be mounted to Frost code 909-100 pedestal, to a wall, or even to standard square perforated sign post tubing. The dispenser comes with a label reading “Pet Waste Station” which can be applied to the top of the dispenser if the end user wishes to do so. This label is shown in the product images.

Materials: 18 gauge steel with RAL super durable TGIC-free polyester powder coating which provides a rust proof finish. Tested to survive harsh summer and winter weather.

Capacity: The dispenser holds two boxes of disposable bags. Each box holds 200 bags. Total capacity is 400 bags.

Loading Instructions:  Use key provided to unlock the dispenser at the front of the unit. Pull front of the dispenser out and up to swing the lid open. Place 1 or 2 boxes of disposable pet waste bags in the unit. The unit will hold 2 pet waste bag boxes at a size of 8.75″L x 3.125″H x 3.125″D each. Close the door to the unit and secure the tumbler lock at the front. If you have trouble locking the unit, simply slightly lift the boxes inside the unit and turn the key in the lock, as the boxes may be interfering with the closing of the lock.

Weight: 4.5 lbs (2 kg)

Dimensions: 9.25″L x 3.25″D x 10″H (23.5cm L x 8.3cm D x 25.4cm H)

Installation: For unrestricted access, bottom of unit to floor must not exceed 48″ (121.9cm). The unit is able to be installed on an exterior building wall, on the Frost 909-100 mounting pedestal, or on a standard square perforated sign post tubing (2″x 2″)

Maintenance: Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Do not use harsh detergents or chemical cleaners. Maintenance staff should periodically inspect bag levels based on site usage.

Warranty: Frost Products Ltd warrants that if any Frost product or Frost product part proves to be defective within 12 months from the date of shipment from the factory it will be repaired or replaced without any charge when authorized. Frost warranty does not cover damaged product due to neglect or mishandling. Frost warranty does not cover installation or removal costs. Discolouration to stainless steel parts resulting from exposure to harsh environmental and/or chemicals are not considered to be defects in workmanship or material and are not covered under warranty.